Design of PMaSynRM for Flywheel Energy Storage System in Smart Grids

Sadullah Esmer, Erdal Bekiroglu

Abstract


In this study, a flywheel energy storage system (FESS) has been designed for smart grid applications. The requirements of the flywheel and electrical machine, which are the most important parts of FESS, have been determined. Analytical solutions approach has been performed for the flywheel with a capacity of 40 kWh. A high-speed permanent magnet-assisted synchronous reluctance machine (PMaSynRM) has been designed with Ansys Motor-Cad to meet the requirements of system. The torque-speed-power graph, thermal situation, magnetic flux lines, efficiency map, power map, and power factor map of FESS were analysed and obtained using the finite element method. Analyses were performed using Ansys Maxwell and the Machine Toolkit plugin. The results showed that the designed FESS offers high efficiency, high speed, and high energy storage capacity to be used in the smart grid applications.


Keywords


Smart Grids; Flywheel Energy Storage System; PMaSynRM

Full Text:

PDF

References


M. Akil, E. Dokur, and R. Bayindir, “A Coordinated EV Charging Scheduling Containing PV System,” Int. J. SMART GRID, vol. 6, no. 3, pp. 65–71, 2022.

B. Kocaman, “Ak?ll? ?ebekeler ve Mikro ?ebekelerde Enerji Depolama Teknolojileri,” Bitlis Eren Üniversitesi Fen Bilim. Derg., vol. 2, no. 1, pp. 119–127, 2013.

T. Vijayapriya and D. Pralhadas Kothari, “Smart Grid: An Overview,” Smart Grid Renew. Energy, vol. 2, pp. 305–311, 2011, doi: 10.4236/sgre.2011.24035.

J. M. Guerrero, L. García de Vicuña, and M. Castilla, “Hierarchical Control of Droop-Controlled AC and DC Microgrids—A General Approach Toward Standardization,” IEEE Trans. Ind. Electron., vol. 58, no. 1, pp. 158–172, 2011.

B. B. Alagoz, A. Kaygusuz, and A. Karabiber, “A user-mode distributed energy management architecture for smart grid applications,” Energy, vol. 44, no. 1, pp. 167–177, 2012, doi: 10.1016/J.ENERGY.2012.06.051.

A. Oymak and M. R. Tür, “A Short Review on the Optimization Methods Using for Distributed Generation Planning,” Int. J. SMART GRID, vol. 6, no. 3, pp. 54–64, 2022.

M. Subkhan and M. Komori, “New concept for flywheel energy storage system using SMB and PMB,” IEEE Trans. Appl. Supercond., vol. 21, no. 3, pp. 1485–1488, Jun. 2011, doi: 10.1109/TASC.2010.2098470.

M. Shadnam Zarbil, A. Vahedi, H. Azizi Moghaddam, and M. Saeidi, “Design and implementation of flywheel energy storage system control with the ability to withstand measurement error,” J. Energy Storage, vol. 33, p. 102047, Jan. 2021, doi: 10.1016/J.EST.2020.102047.

H. Gao, W. Li, and H. Cai, “Distributed control of a flywheel energy storage system subject to unreliable communication network,” Energy Reports, vol. 8, pp. 11729–11739, Nov. 2022, doi: 10.1016/J.EGYR.2022.09.014.

J. Yang, P. Liu, C. Ye, L. Wang, X. Zhang, and S. Huang, “Multidisciplinary Design of High-Speed Solid Rotor Homopolar Inductor Machine for Flywheel Energy Storage System,” IEEE Trans. Transp. Electrif., vol. 7, no. 2, pp. 485–496, Jun. 2021, doi: 10.1109/TTE.2020.3033375.

Z. Q. Liu, K. Wang, and F. Li, “Design and Analysis of Permanent Magnet Homopolar Machine for Flywheel Energy Storage System,” IEEE Trans. Magn., vol. 55, no. 7, Jul. 2019, doi: 10.1109/TMAG.2019.2906084.

P. Haidl and A. Buchroithner, “Design of a Low-Loss, Low-Cost Rolling Element Bearing System for a 5 kWh/100 kW Flywheel Energy Storage System,” Energies 2021, Vol. 14, Page 7195, vol. 14, no. 21, p. 7195, Nov. 2021, doi: 10.3390/EN14217195.

A. Floris, A. Damiano, and A. Serpi, “Design and performance assessment of an integrated flywheel energy storage systems based on an inner-rotor large-airgap SPM,” Proc. - 2020 Int. Conf. Electr. Mach. ICEM 2020, pp. 633–639, Aug. 2020, doi: 10.1109/ICEM49940.2020.9271069.

J. Gao, S. Zhao, J. Liu, W. Du, Z. Zheng, and F. Jiang, “A novel flywheel energy storage system: Based on the barrel type with dual hubs combined flywheel driven by switched flux permanent magnet motor,” J. Energy Storage, vol. 47, p. 103604, Mar. 2022, doi: 10.1016/J.EST.2021.103604.

X. Li, D. Dietz, J. An, N. Erd, Y. Gemeinder, and A. Binder, “Manufacture and Testing of a Magnetically Suspended 0.5 kWh-Flywheel Energy Storage System,” IEEE Trans. Ind. Appl., 2022, doi: 10.1109/TIA.2022.3187393.

M. M. Biswas et al., “Towards Implementation of Smart Grid: An Updated Review on Electrical Energy Storage Systems,” Smart Grid Renew. Energy, vol. 4, no. 1, pp. 122–132, Feb. 2013, doi: 10.4236/SGRE.2013.41015.

K. AYDIN and M. T. AYDEM?R, “Sizing design and implementation of a flywheel energy storage system for space applications,” Turkish J. Electr. Eng. Comput. Sci., vol. 24, no. 3, pp. 793–806, 2016.

X. Li and A. Palazzolo, “A review of flywheel energy storage systems: state of the art and opportunities,” J. Energy Storage, vol. 46, p. 103576, 2022, doi: 10.1016/j.est.2021.103576.

H. Huang, L. Jing, R. Qu, and D. Li, “The Demagnetizing Protection of Halbach Consequent Pole in a Magnetic-Geared Machine,” ICEMS 2018 - 2018 21st Int. Conf. Electr. Mach. Syst., pp. 365–370, Nov. 2018, doi: 10.23919/ICEMS.2018.8549519.




DOI (PDF): https://doi.org/10.20508/ijsmartgrid.v6i4.255.g254

Refbacks

  • There are currently no refbacks.


www.ijsmartgrid.com; www.ijsmartgrid.org

ilhcol@gmail.com; ijsmartgrid@nisantasi.edu.tr

Online ISSN: 2602-439X

Publisher: ilhami COLAK (istanbul Nisantasi Univ)

Cited in Google Scholar and CrossRef